Cam-action indexing plunger are used where any change in locking position due to lateral forces should be prevented. Turning the grip through 180° retracts the indexing pin, enabling a change in the indexed position. The notch ensures that the grip remains in this position and the indexing pin remains retracted.
A stop at 180° prevents the lever rotating further and the indexing pin from extending again.
The rotation direction is defined by selecting a left or right stop side.

Stainless steel 1.4305.

Threaded sleeve and grip bright.
Indexing pin ground and left bright.
Spring bright.
Grip cap in various colors:
-black gray RAL 7021
-pure orange RAL 2004
-colza yellow RAL 1021
-traffic red RAL 3020
-signal green RAL 6032
-traffic blue RAL 5017
-light gray RAL 7035

Turning the grip through 180° retracts the pin.
Optionally available with colored plastic grip caps.
180° stop with rotation in one direction.

Special versions.

Style A: without grip cap or locknut
Style B: without grip cap, with locknut
Style C: with grip cap, without locknut
Style D: with grip cap and locknut

1) Stop left
2) Stop right

Mounting bracket 03099.
Positioning bushes 03099-50, 03099-60, 03099-61.